bci wheels

-PRODUCT PERFORMANCE PASSION-

29 Essington Street Grovedale, VIC, 3216 Australia

(03) 52784657

(PLEASE NOTE THE CHECKOUT ON OUR SITE IS NOT SETUP. IF YOU WOULD LIKE TO PLACE AN ORDER PLEASE EMAIL US WITH YOUR CONTACT AND DELIVERY DETAILS. ALSO INCLUDE A BREAKDOWN OF WHAT YOU WISH TO ORDER)

COUNTER SALES, PHONE SALES & EMAIL ORDERS ALL WELCOME

CUSTOM STEEL WHEELS

 

OH YES...WE CAN CUSTOM BUILD YOUR WHEELS

MOST OF OUR WHEELS ARE PRE-FABRICATED, HOWEVER WE UNDERSTAND THAT YOUR CUSTOM BUILD MAY NEED A DIFFERENT OFFSET. (ESPECIALLY REAR ENDS). WE KEEP RAW BANDS AND CENTRES TO ALLOW THE OFFSET YOU REQUIRE AND MODIFY WHEELS TO SUIT ORIGINAL CAPS.

(PLEASE NOTE THE RAW MATERIALS WE STOCK EG. WIDTHS & DIAMETERS ARE NOT VARIABLE FROM WHATS LISTED, THE CENTRES ALREADY HAVE A SET STUD PATTERN AND CENTRE BORE DRILLED THIS MEANS WE CANNOT RE-DRILL THESE CENTRES TO SUIT ALL STUD PATTERNS)

WE CAN ALSO MAKE A 15” RIM USING 14” CENTRES IN A SPECIAL “DROP BAND” RIM.

YOU MAY ALSO WANT A STANDARD 14” 15” & 17” RIM MADE WIDER EG A GMH INTERCEPTOR MADE TO 8”, 9” OR 10” WIDE & OR CHANGE OFFSET.

HOW TO MEASURE CORRECTLY

  • JACK VEHICLE UP ON LEVEL GROUND.

  • SUPPORT THE CAR BY JACK STAND AT THE SUSPENSION THEN REMOVE YOUR WHEELS.

  • BE SURE THE HUB’S MOUNTING SURFACE IS VERTICAL.

  • USE A RIGID STRAIGHT EDGE FOR ALL MEASUREMENTS, (1 METER SPIRIT LEVEL FOR BEST RESULTS)

  • WHEN MEASURING FROM THE MOUNTING SURFACE, BE SURE TO USE THE SIDE OF THE STRAIGHT EDGE THAT TOUCHES THE SURFACE OF YOUR BRAKES FOR ALL MEASUREMENTS. (BRAKE DRUM OR ROTOR)

FOLLOW THIS PROCESS AND FILL OUT THE CHART BELOW ALONG WITH ALL YOUR CONTACT DETAILS THEN EMAIL IT DIRECT AND WE WILL BE IN CONTACT AS SOON AS WE CAN.

(PLEASE EMAIL DO NOT CALL FOR CUSTOM OFFSET WHEELS AS CALCULATING QUOTES AND CHECKING STOCK TAKES TIME)

sales@bciwheels.com.au

 
Untitled.jpg