1. Home
  2. ACCESSORIES
  3. WHEEL NUTS
  4. 12X1.5 CHROME 45MM LONG BULLET WHEEL NUT 19MM HEX (60 DEGREE TAPER)
12X1.5 CHROME 45MM LONG BULLET WHEEL NUT 19MM HEX (60 DEGREE TAPER)

12X1.5 CHROME 45MM LONG BULLET WHEEL NUT 19MM HEX (60 DEGREE TAPER)

WN122
$2
Out of stock

check_circleDispatched within 24 hours

check_circleManufacturer warranty

THIS WHEEL NUT IS COMPATIBLE WITH:

HOLDEN COMMODORE UP TO BUT NOT INCLUDING VE-VF

HOLDEN RODEO

HOLDEN STATESMAN VQ-VR-VS-WH-WK-WL

TOYOTA LANDCRUISER 1989-1998 - 80 SERIES STEEL WHEELS

FORD RANGER-PJ-PK-PX 2003-2018

MAZDA BT 50

ISUZU D MAX

CHROME BULLET WHEEL NUT:

12X1.5 UNF THREAD SIZE

3/4” (19MM) HEX HEAD

23MM WIDE SEAT

45MM HEIGHT

30MM APPROX. INSIDE THREAD

RIGHT HAND THREAD

IMPORTANT NOTE: THE STANDARD WHEEL WRENCH OR SOCKET MAY BE TOO SHORT TO REACH THE HEXAGON TO TIGHTEN THE NUT.

Finish
CHROME

Australia’s #1 manufacturer and supplier of old school, muscle and classic wheels.

Founded in 2013, BCI Wheels is your ultimate destination for premium passenger and classic car steel wheels. With an unwavering commitment to excellence, we take pride in delivering top-notch products that meet global standards through DOT, SAE and VIA. Quality is also ensured through ISO900.

When it comes to wheels, we believe that every ride deserves nothing less than the best.

All orders are packed carefully in our Australian warehouse. Majority of all orders are dispatched same business day.

Our carrier partners include FedEx, Aus post, Couriers please, TNT, Toll and Aramax.

Goods can be delivered to residential and business addresses only. No PO Boxes.

Wheels produced by BCI Wheels will be covered against manufacturing defects in workmanship and materials under normal and intended use. Under normal and reasonable use, BCI Wheels will carry a 1-year structural warranty to the original retail purchaser of the product.

This Warranty Shall Not Apply To:

  • Any malfunction, defect, or failure caused by improper maintenance, wheel transport damage, accident, abuse, or negligence.
  • Corrosion or cosmetic issues on wheels result from car damage, chemicals, climate conditions, or neglect.
  • Blemishes, peeling or discolouration on the back side of the wheel.
  • Damage or structural failure occurs due to road conditions, accidents, off-road activities that exceed their load rating, or road hazard impact.
  • Damage resulted from improper mounting, excessive vehicle loads, and/or incorrect tyre sizes.
  • Appearance defects in wheels that have been mounted after purchase or damaged during tyre mounting and/or balancing.
  • Wheels damaged by shipping or handling. Inspect shipments and contact the shipping company if any products are damaged. Shipping damage claims must be filed with the delivery carrier.
  • Accessories that are supplied with the original purchase (wheel nuts/bolts or hub rings) are not covered under this warranty.

Refunds and exchange requests must be made within 14 days after receipt of your goods.

Returns can be made in person at the following location: 29 Essington St, Grovedale, Vic, 3216.

Returns can be made by shipping the goods back to us at the above location. Shipping is at the purchaser’s expense. All returns incur a 20% re stocking fee

Refunds & returns do not apply to the following goods:

  • Sale items
  • Custom wheels

WHEELS AND ACCESSORIES WILL NOT BE ACCEPTED FOR RETURNS ONCE THEY HAVE BEEN FITTED

THIS WHEEL NUT IS COMPATIBLE WITH:

HOLDEN COMMODORE UP TO BUT NOT INCLUDING VE-VF

HOLDEN RODEO

HOLDEN STATESMAN VQ-VR-VS-WH-WK-WL

TOYOTA LANDCRUISER 1989-1998 - 80 SERIES STEEL WHEELS

FORD RANGER-PJ-PK-PX 2003-2018

MAZDA BT 50

ISUZU D MAX

CHROME BULLET WHEEL NUT:

12X1.5 UNF THREAD SIZE

3/4” (19MM) HEX HEAD

23MM WIDE SEAT

45MM HEIGHT

30MM APPROX. INSIDE THREAD

RIGHT HAND THREAD

IMPORTANT NOTE: THE STANDARD WHEEL WRENCH OR SOCKET MAY BE TOO SHORT TO REACH THE HEXAGON TO TIGHTEN THE NUT.

Finish
CHROME

Australia’s #1 manufacturer and supplier of old school, muscle and classic wheels.

Founded in 2013, BCI Wheels is your ultimate destination for premium passenger and classic car steel wheels. With an unwavering commitment to excellence, we take pride in delivering top-notch products that meet global standards through DOT, SAE and VIA. Quality is also ensured through ISO900.

When it comes to wheels, we believe that every ride deserves nothing less than the best.

All orders are packed carefully in our Australian warehouse. Majority of all orders are dispatched same business day.

Our carrier partners include FedEx, Aus post, Couriers please, TNT, Toll and Aramax.

Goods can be delivered to residential and business addresses only. No PO Boxes.

Wheels produced by BCI Wheels will be covered against manufacturing defects in workmanship and materials under normal and intended use. Under normal and reasonable use, BCI Wheels will carry a 1-year structural warranty to the original retail purchaser of the product.

This Warranty Shall Not Apply To:

  • Any malfunction, defect, or failure caused by improper maintenance, wheel transport damage, accident, abuse, or negligence.
  • Corrosion or cosmetic issues on wheels result from car damage, chemicals, climate conditions, or neglect.
  • Blemishes, peeling or discolouration on the back side of the wheel.
  • Damage or structural failure occurs due to road conditions, accidents, off-road activities that exceed their load rating, or road hazard impact.
  • Damage resulted from improper mounting, excessive vehicle loads, and/or incorrect tyre sizes.
  • Appearance defects in wheels that have been mounted after purchase or damaged during tyre mounting and/or balancing.
  • Wheels damaged by shipping or handling. Inspect shipments and contact the shipping company if any products are damaged. Shipping damage claims must be filed with the delivery carrier.
  • Accessories that are supplied with the original purchase (wheel nuts/bolts or hub rings) are not covered under this warranty.

Refunds and exchange requests must be made within 14 days after receipt of your goods.

Returns can be made in person at the following location: 29 Essington St, Grovedale, Vic, 3216.

Returns can be made by shipping the goods back to us at the above location. Shipping is at the purchaser’s expense. All returns incur a 20% re stocking fee

Refunds & returns do not apply to the following goods:

  • Sale items
  • Custom wheels

WHEELS AND ACCESSORIES WILL NOT BE ACCEPTED FOR RETURNS ONCE THEY HAVE BEEN FITTED

Australia’s #1 manufacturer and supplier of old school, muscle and classic wheels.

Founded in 2013, BCI Wheels is your ultimate destination for premium passenger and classic car steel wheels. With an unwavering commitment to excellence, we take pride in delivering top-notch products that meet global standards through DOT, SAE and VIA. Quality is also ensured through ISO900.

When it comes to wheels, we believe that every ride deserves nothing less than the best.

CUSTOMER RIDES